Update SLA.md

Update install.sh

SLA.md

@@ -0,0 +1,60 @@
+This Service Level Agreement (SLA) outlines the terms and conditions under which RustDesk provides email support to its customers. This SLA is designed to ensure a high level of service quality and customer satisfaction.
+
+1. Scope of Support
+RustDesk offers email support to assist customers with issues related to the installation, configuration, usage, and troubleshooting of RustDesk software. Support is available for the following:
+
+- Technical issues and bugs
+- Feature inquiries
+- General usage questions
+
+Exclusions:
+
+- Custom development or scripting
+- Third-party software or hardware issues
+- Training or consulting services
+
+2. Support Availability
+Email support is available 24 hours a day, 7 days a week. However, responses will be provided during standard business hours (Monday to Friday, 9:00 AM to 6:00 PM GMT+7).
+
+3. Response and Resolution Times
+   
+RustDesk is committed to providing timely responses and resolutions to customer inquiries. The following table outlines our target response and resolution times based on the severity of the issue:
+| **Severity Level** | **Description**                                                                 | **Initial Response Time** | **Target Resolution Time** |
+|---------------------|---------------------------------------------------------------------------------|---------------------------|-----------------------------|
+| **Critical**        | System outage or major functionality failure impacting core operations.         | 2 hours                   | 24 hours                    |
+| **High**            | Significant performance degradation or partial loss of functionality.           | 4 hours                   | 48 hours                    |
+| **Medium**          | Minor issues or questions that do not significantly impact functionality.       | 8 hours                   | 5 business days             |
+| **Low**             | General inquiries, feature requests, or non-urgent questions.                   | 24 hours                  | 10 business days            |
+
+Note: Resolution times are estimates and may vary depending on the complexity of the issue. RustDesk will provide regular updates if additional time is required.
+
+4. Customer Responsibilities
+To ensure efficient support, customers are expected to:
+
+Provide detailed descriptions of the issue, including error messages, screenshots, and steps to reproduce the problem.
+
+Specify the RustDesk version, operating system, and any relevant configuration details.
+
+Respond promptly to requests for additional information from the support team.
+
+5. Escalation Process
+If an issue is not resolved within the target resolution time or requires further attention, customers may escalate the issue by contacting the RustDesk support manager at zhou@rustdesk.com. Escalated issues will be prioritized and addressed by senior support staff.
+
+6. Limitations
+RustDesk does not guarantee resolution for all issues, particularly those caused by third-party software, hardware, or unsupported configurations.
+
+Support is limited to the current and immediately previous versions of RustDesk software.
+
+7. Changes to the SLA
+RustDesk reserves the right to modify this SLA at any time. Customers will be notified of significant changes via email or through the RustDesk website.
+
+8. Contact Information
+For email support, please contact: support@rustdesk.com
+
+By using RustDesk email support, customers agree to the terms outlined in this SLA.
+
+RustDesk Team
+
+rustdesk.com
+
+support@rustdesk.com

backup.sh

@@ -1,157 +0,0 @@
-#!/usr/bin/env bash
-
-# shellcheck disable=2034,2059,2164
-true
-
-usern=$(whoami)
-path=$(pwd)
-echo "$path"
-
-ARCH=$(uname -m)
-
-
-# Identify OS
-if [ -f /etc/os-release ]; then
-    # freedesktop.org and systemd
-    . /etc/os-release
-    OS=$NAME
-    VER=$VERSION_ID
-    UPSTREAM_ID=${ID_LIKE,,}
-
-    # Fallback to ID_LIKE if ID was not 'ubuntu' or 'debian'
-    if [ "${UPSTREAM_ID}" != "debian" ] && [ "${UPSTREAM_ID}" != "ubuntu" ]; then
-        UPSTREAM_ID="$(echo "${ID_LIKE,,}" | sed s/\"//g | cut -d' ' -f1)"
-    fi
-
-elif type lsb_release >/dev/null 2>&1; then
-    # linuxbase.org
-    OS=$(lsb_release -si)
-    VER=$(lsb_release -sr)
-elif [ -f /etc/lsb-release ]; then
-    # For some versions of Debian/Ubuntu without lsb_release command
-    . /etc/lsb-release
-    OS=$DISTRIB_ID
-    VER=$DISTRIB_RELEASE
-elif [ -f /etc/debian_version ]; then
-    # Older Debian, Ubuntu, etc.
-    OS=Debian
-    VER=$(cat /etc/debian_version)
-elif [ -f /etc/SuSE-release ]; then
-    # Older SuSE, etc.
-    OS=SuSE
-    VER=$(cat /etc/SuSE-release)
-elif [ -f /etc/redhat-release ]; then
-    # Older Red Hat, CentOS, etc.
-    OS=RedHat
-    VER=$(cat /etc/redhat-release)
-else
-    # Fall back to uname, e.g. "Linux <version>", also works for BSD, etc.
-    OS=$(uname -s)
-    VER=$(uname -r)
-fi
-
-
-# Output debugging info if $DEBUG set
-if [ "$DEBUG" = "true" ]; then
-    echo "OS: $OS"
-    echo "VER: $VER"
-    echo "UPSTREAM_ID: $UPSTREAM_ID"
-    exit 0
-fi
-
-# Setup prereqs for server
-# Common named prereqs
-PREREQ="tar"
-PREREQDEB="sqlite3"
-PREREQRPM="sqlite"
-PREREQARCH="sqlite"
-
-echo "Installing prerequisites"
-if [ "${ID}" = "debian" ] || [ "$OS" = "Ubuntu" ] || [ "$OS" = "Debian" ] || [ "${UPSTREAM_ID}" = "ubuntu" ] || [ "${UPSTREAM_ID}" = "debian" ]; then
-    sudo apt-get update
-    sudo apt-get install -y ${PREREQ} ${PREREQDEB} # git
-elif [ "$OS" = "CentOS" ] || [ "$OS" = "RedHat" ] || [ "${UPSTREAM_ID}" = "rhel" ] ; then
-# openSUSE 15.4 fails to run the relay service and hangs waiting for it
-# Needs more work before it can be enabled
-# || [ "${UPSTREAM_ID}" = "suse" ]
-    sudo yum update -y
-    sudo dnf install -y epel-release
-    sudo yum install -y ${PREREQ} ${PREREQRPM} # git
-elif [ "${ID}" = "arch" ] || [ "${UPSTREAM_ID}" = "arch" ]; then
-    sudo pacman -Syu
-    sudo pacman -S ${PREREQ} ${PREREQARCH}
-else
-    echo "Unsupported OS"
-    # Here you could ask the user for permission to try and install anyway
-    # If they say yes, then do the install
-    # If they say no, exit the script
-    exit 1
-fi
-
-if [[ $* == *--schedule* ]]; then
-    (
-        crontab -l 2>/dev/null
-        echo "0 0 * * * $path/backup.sh --auto"
-    ) | crontab -
-
-    if [ ! -d /opt/rustdesk-server-backups ]; then
-        sudo mkdir /opt/rustdesk-server-backups
-    fi
-
-    if [ ! -d /opt/rustdesk-server-backups/daily ]; then
-        sudo mkdir /opt/rustdesk-server-backups/daily
-    fi
-
-    if [ ! -d /opt/rustdesk-server-backups/weekly ]; then
-        sudo mkdir /opt/rustdesk-server-backups/weekly
-    fi
-
-    if [ ! -d /opt/rustdesk-server-backups/monthly ]; then
-        sudo mkdir /opt/rustdesk-server-backups/monthly
-    fi
-    sudo chown "${usern}":"${usern}" -R /opt/rustdesk-server-backups
-
-    printf >&2 "Backups setup to run at midnight and rotate."
-    exit 0
-fi
-
-if [ ! -d /opt/rustdesk-server-backups ]; then
-    sudo mkdir /opt/rustdesk-server-backups
-    sudo chown "${usern}":"${usern}" /opt/rustdesk-server-backups
-fi
-
-dt_now=$(date '+%Y_%m_%d__%H_%M_%S')
-tmp_dir=$(mktemp -d -t rustdesk-XXXXXXXXXXXXXXXXXXXXX)
-sysd="/etc/systemd/system"
-
-cp -rf /var/lib/rustdesk-server/ "${tmp_dir}"/
-sqlite3 /var/lib/rustdesk-server/db.sqlite3 .dump > "${tmp_dir}"/db_backup_file.sql
-
-if [[ $* == *--auto* ]]; then
-
-    month_day=$(date +"%d")
-    week_day=$(date +"%u")
-
-    if [ "$month_day" -eq 10 ]; then
-        tar -cf /opt/rustdesk-server-backups/monthly/rustdesk-backup-"${dt_now}".tar -C "${tmp_dir}" .
-    else
-        if [ "$week_day" -eq 5 ]; then
-            tar -cf /opt/rustdesk-server-backups/weekly/rustdesk-backup-"${dt_now}".tar -C "${tmp_dir}" .
-        else
-            tar -cf /opt/rustdesk-server-backups/daily/rustdesk-backup-"${dt_now}".tar -C "${tmp_dir}" .
-        fi
-    fi
-
-    rm -rf "${tmp_dir}"
-
-    find /opt/rustdesk-server-backups/daily/ -type f -mtime +14 -name '*.tar' -execdir rm -- '{}' \;
-    find /opt/rustdesk-server-backups/weekly/ -type f -mtime +60 -name '*.tar' -execdir rm -- '{}' \;
-    find /opt/rustdesk-server-backups/monthly/ -type f -mtime +380 -name '*.tar' -execdir rm -- '{}' \;
-    echo -ne "Backup Completed"
-    exit
-
-else
-    tar -cf /opt/rustdesk-server-backups/rustdesk-backup-"${dt_now}".tar -C "${tmp_dir}" .
-    rm -rf "${tmp_dir}"
-    echo -ne "Backup saved to /opt/rustdesk-server-backups/rustdesk-backup-${dt_now}.tar"
-fi

install.sh

@@ -12,6 +12,13 @@
 
 ##################################################################################################################
 
+TLS=""
+if command -v ldconfig &> /dev/null; then
+    if ldconfig -p | grep -q "libssl.so.3"; then
+        TLS="-nativetls"
+    fi
+fi
+
 # Install curl and whiptail if needed
 if [ ! -x "$(command -v curl)" ] || [ ! -x "$(command -v whiptail)" ]
 then
@@ -166,6 +173,7 @@ Please report this to: https://github.com/rustdesk/rustdesk-server-pro/issues"
         then
             ACTUAL_TAR_NAME=arm64v8
         fi
+        ACTUAL_TAR_NAME=${ACTUAL_TAR_NAME}${TLS}
         # Download
         if ! curl -fSLO --retry 3 https://github.com/rustdesk/rustdesk-server-pro/releases/download/"${RDLATEST}"/rustdesk-server-linux-"${ACTUAL_TAR_NAME}".tar.gz
         then
@@ -189,14 +197,17 @@ This might be temporary, so please try to run the installation script again."
         fi
         mv "${ACTUAL_TAR_NAME}"/hbbr /usr/bin/
         mv "${ACTUAL_TAR_NAME}"/hbbs /usr/bin/
+        mv "${ACTUAL_TAR_NAME}"/rustdesk-utils /usr/bin/
         rm -rf "$RUSTDESK_INSTALL_DIR"/"${ACTUAL_TAR_NAME:?}"
         rm -rf rustdesk-server-linux-"${ACTUAL_TAR_NAME}".tar.gz
         chmod +x /usr/bin/hbbs
         chmod +x /usr/bin/hbbr
+        chmod +x /usr/bin/rustdesk-utils
         if [ -n "$RUSTDESK_USER" ]
         then
             chown "$RUSTDESK_USER":"$RUSTDESK_USER" -R /usr/bin/hbbr
-            chown "$RUSTDESK_USER":"$RUSTDESK_USER" -R /usr/bin/hbbr
+            chown "$RUSTDESK_USER":"$RUSTDESK_USER" -R /usr/bin/hbbs
+            chown "$RUSTDESK_USER":"$RUSTDESK_USER" -R /usr/bin/rustdesk-utils
         fi
     else
         print_text_in_color "$IGreen" "Rustdesk server already installed."
@@ -359,7 +370,7 @@ case "$choice" in
         while :
         do
             RUSTDESK_DOMAIN=$(input_box_flow "Please enter your domain, e.g. rustdesk.example.com")
-            DIG=$(dig +short "${RUSTDESK_DOMAIN}" @resolver1.opendns.com)
+            DIG=$(dig +short "${RUSTDESK_DOMAIN}" @8.8.8.8)
             if ! [[ "$RUSTDESK_DOMAIN" =~ ^[a-zA-Z0-9]+([a-zA-Z0-9.-]*[a-zA-Z0-9]+)?$ ]]
             then
                 msg_box "$RUSTDESK_DOMAIN is an invalid domain/DNS address! Please try again."
@@ -369,7 +380,7 @@ case "$choice" in
         done
 
         # Check if DNS are forwarded correctly
-        if dig +short "$RUSTDESK_DOMAIN" @resolver1.opendns.com | grep -q "$WANIP4"
+        if dig +short "$RUSTDESK_DOMAIN" @8.8.8.8 | grep -q "$WANIP4"
         then
             print_text_in_color "$IGreen" "DNS seems correct when checking with dig!"
         else

restore.sh

@@ -1,304 +0,0 @@
-#!/usr/bin/env bash
-
-# shellcheck disable=2034,2059,2164
-true
-
-usern=$(whoami)
-path=$(pwd)
-echo "$path"
-
-# Check for /var/lib/rustdesk-server/
-if [ -d "/var/lib/rustdesk-server" ]; then
-    echo "Directory already exists so not needing to restore"
-    exit
-fi
-
-ARCH=$(uname -m)
-
-
-# Identify OS
-if [ -f /etc/os-release ]; then
-    # freedesktop.org and systemd
-    source /etc/os-release
-    OS=$NAME
-    VER=$VERSION_ID
-    UPSTREAM_ID=${ID_LIKE,,}
-
-    # Fallback to ID_LIKE if ID was not 'ubuntu' or 'debian'
-    if [ "${UPSTREAM_ID}" != "debian" ] && [ "${UPSTREAM_ID}" != "ubuntu" ]; then
-        UPSTREAM_ID="$(echo "${ID_LIKE,,}" | sed s/\"//g | cut -d' ' -f1)"
-    fi
-
-elif type lsb_release >/dev/null 2>&1; then
-    # linuxbase.org
-    OS=$(lsb_release -si)
-    VER=$(lsb_release -sr)
-elif [ -f /etc/lsb-release ]; then
-    # For some versions of Debian/Ubuntu without lsb_release command
-    source /etc/lsb-release
-    OS=$DISTRIB_ID
-    VER=$DISTRIB_RELEASE
-elif [ -f /etc/debian_version ]; then
-    # Older Debian, Ubuntu, etc.
-    OS=Debian
-    VER=$(cat /etc/debian_version)
-elif [ -f /etc/SuSE-release ]; then
-    # Older SuSE, etc.
-    OS=SuSE
-    VER=$(cat /etc/SuSE-release)
-elif [ -f /etc/redhat-release ]; then
-    # Older Red Hat, CentOS, etc.
-    OS=RedHat
-    VER=$(cat /etc/redhat-release)
-else
-    # Fall back to uname, e.g. "Linux <version>", also works for BSD, etc.
-    OS=$(uname -s)
-    VER=$(uname -r)
-fi
-
-
-# Output debugging info if $DEBUG set
-if [ "$DEBUG" = "true" ]; then
-    echo "OS: $OS"
-    echo "VER: $VER"
-    echo "UPSTREAM_ID: $UPSTREAM_ID"
-    exit 0
-fi
-
-# Setup prereqs for server
-# Common named prereqs
-PREREQ="curl wget unzip tar"
-PREREQDEB="dnsutils ufw sqlite3"
-PREREQRPM="bind-utils sqlite"
-PREREQARCH="bind sqlite"
-
-echo "Installing prerequisites"
-if [ "${ID}" = "debian" ] || [ "$OS" = "Ubuntu" ] || [ "$OS" = "Debian" ] || [ "${UPSTREAM_ID}" = "ubuntu" ] || [ "${UPSTREAM_ID}" = "debian" ]; then
-    sudo apt-get update
-    sudo apt-get install -y "${PREREQ}" "${PREREQDEB}" # git
-elif [ "$OS" = "CentOS" ] || [ "$OS" = "RedHat" ] || [ "${UPSTREAM_ID}" = "rhel" ] || [ "${OS}" = "Almalinux" ] || [ "${UPSTREAM_ID}" = "Rocky*" ] ; then
-# openSUSE 15.4 fails to run the relay service and hangs waiting for it
-# Needs more work before it can be enabled
-# || [ "${UPSTREAM_ID}" = "suse" ]
-    sudo yum update -y
-    sudo dnf install -y epel-release
-    sudo yum install -y "${PREREQ}" "${PREREQRPM}" # git
-elif [ "${ID}" = "arch" ] || [ "${UPSTREAM_ID}" = "arch" ]; then
-    sudo pacman -Syu
-    sudo pacman -S "${PREREQ}" "${PREREQARCH}"
-else
-    echo "Unsupported OS"
-    # Here you could ask the user for permission to try and install anyway
-    # If they say yes, then do the install
-    # If they say no, exit the script
-    exit 1
-fi
-
-tmp_dir=$(mktemp -d -t)
-
-tar -xf "$path"/*.tar -C "$tmp_dir"
-
-cp -rf "${tmp_dir}"/rustdesk-server/ /var/lib/
-sudo chown "${usern}":"${usern}" -R /var/lib/rustdesk-server/
-rm /var/lib/rustdesk-server/db.sqlite3
-sqlite3 /var/lib/rustdesk-server/db.sqlite3 < "${tmp_dir}"/db_backup_file.sql
-
-# Get current release version
-RDLATEST=$(curl https://api.github.com/repos/rustdesk/rustdesk-server-pro/releases/latest -s | grep "tag_name"| awk '{print substr($2, 2, length($2)-3) }' | sed 's/-.*//')
-
-cd /var/lib/rustdesk-server/
-rm -rf static/
-
-echo "Installing RustDesk Server"
-if [ "${ARCH}" = "x86_64" ] ; then
-wget https://github.com/rustdesk/rustdesk-server-pro/releases/download/"${RDLATEST}"/rustdesk-server-linux-amd64.tar.gz
-tar -xf rustdesk-server-linux-amd64.tar.gz
-mv amd64/static /var/lib/rustdesk-server/
-sudo mv amd64/hbbr /usr/bin/
-sudo mv amd64/hbbs /usr/bin/
-rm -rf amd64/
-rm -rf rustdesk-server-linux-amd64.tar.gz
-elif [ "${ARCH}" = "armv7l" ] ; then
-wget "https://github.com/rustdesk/rustdesk-server-pro/releases/download/${RDLATEST}/rustdesk-server-linux-armv7.tar.gz"
-tar -xf rustdesk-server-linux-armv7.tar.gz
-mv armv7/static /var/lib/rustdesk-server/
-sudo mv armv7/hbbr /usr/bin/
-sudo mv armv7/hbbs /usr/bin/
-rm -rf armv7/
-rm -rf rustdesk-server-linux-armv7.tar.gz
-elif [ "${ARCH}" = "aarch64" ] ; then
-wget "https://github.com/rustdesk/rustdesk-server-pro/releases/download/${RDLATEST}/rustdesk-server-linux-arm64v8.tar.gz"
-tar -xf rustdesk-server-linux-arm64v8.tar.gz
-mv arm64v8/static /var/lib/rustdesk-server/
-sudo mv arm64v8/hbbr /usr/bin/
-sudo mv arm64v8/hbbs /usr/bin/
-rm -rf arm64v8/
-rm -rf rustdesk-server-linux-arm64v8.tar.gz
-fi
-
-sudo chmod +x /usr/bin/hbbs
-sudo chmod +x /usr/bin/hbbr
-
-# Make folder /var/log/rustdesk-server/
-if [ ! -d "/var/log/rustdesk-server" ]; then
-    echo "Creating /var/log/rustdesk-server"
-    sudo mkdir -p /var/log/rustdesk-server/
-fi
-sudo chown "${usern}" -R /var/log/rustdesk-server/
-
-# Setup systemd to launch hbbs
-rustdeskhbbs="$(cat << EOF
-[Unit]
-Description=RustDesk Signal Server
-[Service]
-Type=simple
-LimitNOFILE=1000000
-ExecStart=/usr/bin/hbbs
-WorkingDirectory=/var/lib/rustdesk-server/
-User=${usern}
-Group=${usern}
-Restart=always
-StandardOutput=append:/var/log/rustdesk-server/hbbs.log
-StandardError=append:/var/log/rustdesk-server/hbbs.error
-# Restart service after 10 seconds if node service crashes
-RestartSec=10
-[Install]
-WantedBy=multi-user.target
-EOF
-)"
-echo "${rustdeskhbbs}" | sudo tee /etc/systemd/system/rustdesk-hbbs.service > /dev/null
-sudo systemctl daemon-reload
-sudo systemctl enable rustdesk-hbbs.service
-sudo systemctl start rustdesk-hbbs.service
-
-# Setup systemd to launch hbbr
-rustdeskhbbr="$(cat << EOF
-[Unit]
-Description=RustDesk Relay Server
-[Service]
-Type=simple
-LimitNOFILE=1000000
-ExecStart=/usr/bin/hbbr
-WorkingDirectory=/var/lib/rustdesk-server/
-User=${usern}
-Group=${usern}
-Restart=always
-StandardOutput=append:/var/log/rustdesk-server/hbbr.log
-StandardError=append:/var/log/rustdesk-server/hbbr.error
-# Restart service after 10 seconds if node service crashes
-RestartSec=10
-[Install]
-WantedBy=multi-user.target
-EOF
-)"
-echo "${rustdeskhbbr}" | sudo tee /etc/systemd/system/rustdesk-hbbr.service > /dev/null
-sudo systemctl daemon-reload
-sudo systemctl enable rustdesk-hbbr.service
-sudo systemctl start rustdesk-hbbr.service
-
-while ! [[ $CHECK_RUSTDESK_READY ]]; do
-  CHECK_RUSTDESK_READY=$(sudo systemctl status rustdesk-hbbr.service | grep "Active: active (running)")
-  echo -ne "RustDesk Relay not ready yet...${NC}\n"
-  sleep 3
-done
-
-pubname=$(find /var/lib/rustdesk-server/ -name "*.pub")
-key=$(cat "${pubname}")
-
-echo "Tidying up install"
-if [ "${ARCH}" = "x86_64" ] ; then
-rm rustdesk-server-linux-amd64.tar.gz
-rm -rf amd64
-elif [ "${ARCH}" = "armv7l" ] ; then
-rm rustdesk-server-linux-armv7.tar.gz
-rm -rf armv7
-elif [ "${ARCH}" = "aarch64" ] ; then
-rm rustdesk-server-linux-arm64v8.tar.gz
-rm -rf arm64v8
-fi
-
-rm -rf "${tmp_dir:?}"/
-
-# Choice for DNS or IP
-PS3='Choose your preferred option, IP or DNS/Domain:'
-WAN=("IP" "DNS/Domain")
-select WANOPT in "${WAN[@]}"; do
-case $WANOPT in
-"IP")
-wanip=$(dig @resolver4.opendns.com myip.opendns.com +short)
-sudo ufw allow 21114/tcp
-
-sudo ufw enable && ufw reload
-break
-;;
-
-"DNS/Domain")
-echo -ne "Enter your preferred domain/DNS address ${NC}: "
-read wanip
-# Check wanip is valid domain
-if ! [[ $wanip =~ ^[a-zA-Z0-9]+([a-zA-Z0-9.-]*[a-zA-Z0-9]+)?$ ]]; then
-    echo -e "${RED}Invalid domain/DNS address${NC}"
-    exit 1
-fi
-
-echo "Installing nginx"
-if [ "${ID}" = "debian" ] || [ "$OS" = "Ubuntu" ] || [ "$OS" = "Debian" ] || [ "${UPSTREAM_ID}" = "ubuntu" ] || [ "${UPSTREAM_ID}" = "debian" ]; then
-    sudo apt -y install nginx
-    sudo apt -y install python3-certbot-nginx
-elif [ "$OS" = "CentOS" ] || [ "$OS" = "RedHat" ] || [ "${UPSTREAM_ID}" = "rhel" ] || [ "${OS}" = "Almalinux" ] || [ "${UPSTREAM_ID}" = "Rocky*" ] ; then
-# openSUSE 15.4 fails to run the relay service and hangs waiting for it
-# Needs more work before it can be enabled
-# || [ "${UPSTREAM_ID}" = "suse" ]
-    sudo yum -y install nginx
-    sudo yum -y install python3-certbot-nginx
-elif [ "${ID}" = "arch" ] || [ "${UPSTREAM_ID}" = "arch" ]; then
-    sudo pacman -S install nginx
-    sudo pacman -S install python3-certbot-nginx
-else
-    echo "Unsupported OS"
-    # Here you could ask the user for permission to try and install anyway
-    # If they say yes, then do the install
-    # If they say no, exit the script
-    exit 1
-fi
-
-rustdesknginx="$(
-  cat <<EOF
-server {
-  server_name ${wanip};
-      location / {
-        proxy_pass http://127.0.0.1:21114/;
-}
-}
-EOF
-)"
-
-if [ -d "/etc/nginx/sites-available" ] && [ -d "/etc/nginx/sites-enabled" ]
-then
-    echo "${rustdesknginx}" | sudo tee /etc/nginx/sites-available/rustdesk.conf >/dev/null
-    sudo ln -s /etc/nginx/sites-available/rustdesk.conf /etc/nginx/sites-enabled/rustdesk.conf
-elif [ -d "/etc/nginx/conf.d" ]
-then
-    echo "${rustdesknginx}" | sudo tee /etc/nginx/conf.d/rustdesk.conf >/dev/null
-else
-    msg_box "Couldn't find the Nginx config directory. Please check your system!"
-    exit 1
-fi
-
-sudo ufw allow 80/tcp
-sudo ufw allow 443/tcp
-
-sudo ufw enable && ufw reload
-
-sudo certbot --nginx -d "${wanip}"
-
-break
-;;
-*) echo "Invalid option $REPLY";;
-esac
-done
-
-echo -e "Your IP/DNS Address is ${wanip}"
-echo -e "Your public key is ${key}"
-
-echo -e "Restore is complete"

terms

@@ -13,6 +13,7 @@ IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("LICENSE AGREEMENT") CAR
 3. License Key:
    a) Purslane Limited will provide you with a unique license key ("License Key") to activate the Software on a specific server (machine).
    b) You agree that the License Key provided to you by Purslane Limited will be used exclusively on the designated server (machine) and will not be shared, transferred, or used on any other server (machine) without explicit written permission from Purslane Limited.
+   c) Reselling license and custom client are not allowed.
 
 4. Term and Billing:
    a) The license term for the Software shall be one (1) year, starting from the date of purchase.

update.sh

@@ -3,6 +3,13 @@
 # shellcheck disable=2034,2059,2164
 true
 
+TLS=""
+if command -v ldconfig &> /dev/null; then
+    if ldconfig -p | grep -q "libssl.so.3"; then
+        TLS="-nativetls"
+    fi
+fi
+
 # Get username
 usern=$(whoami) # not used btw ... yet
 
@@ -84,33 +91,37 @@ rm -rf static/
 
 echo "Upgrading RustDesk Server"
 if [ "${ARCH}" = "x86_64" ] ; then
-wget https://github.com/rustdesk/rustdesk-server-pro/releases/download/${RDLATEST}/rustdesk-server-linux-amd64.tar.gz
+wget https://github.com/rustdesk/rustdesk-server-pro/releases/download/${RDLATEST}/rustdesk-server-linux-amd64${TLS}.tar.gz
-tar -xf rustdesk-server-linux-amd64.tar.gz
+tar -xf rustdesk-server-linux-amd64${TLS}.tar.gz
-mv amd64/static /var/lib/rustdesk-server/
+mv amd64${TLS}/static /var/lib/rustdesk-server/
-sudo mv amd64/hbbr /usr/bin/
+sudo mv amd64${TLS}/hbbr /usr/bin/
-sudo mv amd64/hbbs /usr/bin/
+sudo mv amd64${TLS}/hbbs /usr/bin/
-rm -rf amd64/
+sudo mv amd64${TLS}/rustdesk-utils /usr/bin/
-rm -rf rustdesk-server-linux-amd64.tar.gz
+rm -rf amd64${TLS}/
+rm -rf rustdesk-server-linux-amd64${TLS}.tar.gz
 elif [ "${ARCH}" = "armv7l" ] ; then
 wget "https://github.com/rustdesk/rustdesk-server-pro/releases/download/${RDLATEST}/rustdesk-server-linux-armv7.tar.gz"
 tar -xf rustdesk-server-linux-armv7.tar.gz
 mv armv7/static /var/lib/rustdesk-server/
 sudo mv armv7/hbbr /usr/bin/
 sudo mv armv7/hbbs /usr/bin/
+sudo mv armv7/rustdesk-utils /usr/bin/
 rm -rf armv7/
 rm -rf rustdesk-server-linux-armv7.tar.gz
 elif [ "${ARCH}" = "aarch64" ] ; then
-wget "https://github.com/rustdesk/rustdesk-server-pro/releases/download/${RDLATEST}/rustdesk-server-linux-arm64v8.tar.gz"
+wget "https://github.com/rustdesk/rustdesk-server-pro/releases/download/${RDLATEST}/rustdesk-server-linux-arm64v8${TLS}.tar.gz"
-tar -xf rustdesk-server-linux-arm64v8.tar.gz
+tar -xf rustdesk-server-linux-arm64v8${TLS}.tar.gz
-mv arm64v8/static /var/lib/rustdesk-server/
+mv arm64v8${TLS}/static /var/lib/rustdesk-server/
-sudo mv arm64v8/hbbr /usr/bin/
+sudo mv arm64v8${TLS}/hbbr /usr/bin/
-sudo mv arm64v8/hbbs /usr/bin/
+sudo mv arm64v8${TLS}/hbbs /usr/bin/
-rm -rf arm64v8/
+sudo mv arm64v8${TLS}/rustdesk-utils /usr/bin/
-rm -rf rustdesk-server-linux-arm64v8.tar.gz
+rm -rf arm64v8${TLS}/
+rm -rf rustdesk-server-linux-arm64v8${TLS}.tar.gz
 fi
 
 sudo chmod +x /usr/bin/hbbs
 sudo chmod +x /usr/bin/hbbr
+sudo chmod +x /usr/bin/rustdesk-utils
 
 sudo systemctl start rustdesk-hbbs.service
 sudo systemctl start rustdesk-hbbr.service