diff --git a/Packages.md b/Packages.md
index 6757207..dd8d667 100644
--- a/Packages.md
+++ b/Packages.md
@@ -24,18 +24,10 @@ sudo apt update
 sudo apt upgrade
 ```
 
-### Additional Required Setup Steps for Raspberry Pi OS Bullseye and Bookworm
-The newest Raspberry Pi OS defaults to a display driver that doesn't support Moonlight's renderer. You will need to change some configuration on your Pi to resolve this.
+### Additional Required Setup Steps for Raspberry Pi OS
+Modern versions of Raspberry Pi OS defaults to a display driver that doesn't support Moonlight Embedded's renderer. You will need to change some configuration on your Pi to resolve this.
 
-If you are running the latest version of Raspberry Pi OS, you MUST run the following commands BEFORE making changes to `/boot/config.txt`:
-```
-sudo rpi-update
-sudo reboot
-```
-
-If you do not perform the above steps to update your Raspberry Pi kernel first, following the below steps may prevent your Raspberry Pi from booting!
-
-To fix this, you can edit the `/boot/firmware/config.txt` file:
+To fix this, you can edit the `config.txt` file:
 1. Run `sudo nano /boot/firmware/config.txt`
 2. Scroll down using the arrow keys until you see the line that says `dtoverlay=vc4-kms-v3d`
 3. Change that line to `dtoverlay=vc4-fkms-v3d`